Here's a cool trick I thought of in the middle of the night. You can use an S3 Switch with an FS5 filter to set up a Bypass/Q1/Q2 toggle. The left hand connector on the switch (looking at the board with the label upright) will open first (when the switch is in the middle) so hook it up to the bypass on the PS/PD. Connect the other side of the switch to the FS5, and configure it for dual Q switching (see the FS5 Manual). Now you have a switch that bypasses the filter when OFF, and selects between the two configured Q levels in the CENTER and ON positions!
Comments